R/C Tech Forums - View Single Post - havving trouble setting camber on kyosho evolva m3
Old 09-10-2010, 08:34 AM
  #15  
brc358
Tech Elite
iTrader: (18)
 
Join Date: Sep 2005
Location: Corona Ca.
Posts: 2,834
Trader Rating: 18 (100%+)
Default Kyosho

Originally Posted by kyoshoevolvam3
Should it be that the top of the tyre is more curved in \ as apose to curved out /
Top of the tires Always lean toward the chassis. This is negative camber.
Tires never lean out which is positive camber
Front camber <neagitive camber> usually 2 on the Evolva
Rear camber <negative camber> depending on track, between 2 and 3.
I have seen drivers go as high as 4, but just getting started, you should start with 2 negative camber.

Front toe out 1 to 1.5
Rear toe in 2 to 3

Shock oil Mugen works great <600> all four corners

Ride height front 5
Ride height rear 8 to 9

Front sway bar <flat>
Tire size <if trued> rear 74mm front 67mm
Try and use the tires you are going to run with to set up the car<or at least the same size tires when they are trued>
This will get you a good start
brc358 is offline