Originally Posted by
jbright33
bboard carb needles out of box are half turn in from flushtop and bottom and idle is 1 1/4 turns from closed i think its been awhile. as far as temp iv never temped my motor so have no clue about that but i will tell you the js cools down very very quick so to be accurate you gotta pretty much do a pit stop temp.as for my full mod settings im at 1 1/4 turn in on top and 1 3/4 in on bottom using p5 plug and ebmods 30% and dyno86 pipe
I was only temping the motor to make sure it isn't running way too hotm and I'm temping while the motor is still running. I was at 3/4 on top and 1 turn on bottom, and it was getting there. Running p3, Byrons30, and Dynamite 086. I gotta say that even with an off-tune this motor hauls especially on the bottom end.