Originally Posted by
LOSIRACER77
Hahaha. I got the motor that day of the race an ran the motor to half tank 8 times and made sure it was up to 200. Degrees andshut it off at half tank and let it cool off each time. I also used 4 head shims during all of this so I would not hurt the rod. I used a heat gun everytime too start it. So I got a little less that a gallon on it. And the damn thing still has pinch it.
oh dang, just keep running it, dont change a thing except take i think 2 of those shims out. those engines are kinda slow and suck the fuel for about 2 gallons and then they are actually pretty decent engines, you should be getting around 8 min easy!