Originally Posted by
micrors4guy
Thats the problem im having right now. I guess it will take a little time on how much oil to put in them. Im used to 8th and 10th scale shocks twhere you can bleed them. Dosent seem to work like that with the 12th scale shocks
If you look inside the shock body, you'll see a small lip, which the shock o-ring bearing (part #4662) sits on. I usually fill the shock with oil up to that point, perhaps just another drop of oil past it. Then slide 4662 into place and use a paper towel to soak up the little bit of oil that flows over the top of 4662. Then slide the o-ring into place and screw the cap on. This should get you into the ball park of how much oil you need to fill the shock with.