R/C Tech Forums - View Single Post - Team Orion Servos
View Single Post
Old 08-29-2010 | 11:22 PM
  #8  
KWT-NITRO's Avatar
KWT-NITRO
Tech Master
iTrader: (9)
 
Joined: Oct 2008
Posts: 1,616
From: Kuwait
Default

hey guys,

just my 2 cents, i've been running Savox = orion for the last 2 seasons on my buggy, truggy and 1/10 onroad.

for 1/8th buggy/truggy steering, i use the savos 1256 = orion 2015 and its great so far, the torque is amazing and will make your heaviest truck snap.

if you find it a bit slow to your liking, add more steering Expo in your TX, i was used to .10s steering servos and when i first put the 1256, i felt it was slower so i run at +35% steering expo. now its much faster and reacts alot better to your inputs.

your best set-up for both buggy and truggy is 1256 = 2015 steering and 1258 = 1409 (not same specs but close) for throttle.

1258 is 12Kgs and 0.08s
1409 is 14Kgs and 0.09s

and if you think 12-14Kgs aren't enough for all your break need, try them first as i ran once a 8 Kgs servo in my STRR and i had enough brake.

cheers

Ali
KWT-NITRO is offline