R/C Tech Forums - View Single Post - Tekin RS ESC sensored
View Single Post
Old 08-29-2010, 06:10 PM
  #16871  
jep4755
Tech Adept
iTrader: (15)
 
Join Date: Aug 2009
Posts: 124
Trader Rating: 15 (100%+)
Thumbs up Profiles

Originally Posted by andrewdoherty
The TP is printed on the case of the RS next to the LEDs. It used to stand for throttle profiles. Now it stands for timing profiles. I don't know where the NW suggestion above came from.

To choose from TP1-TP5 and C1-C2 without using the HW, turn the esc on, press and release the mode button. The first LED will blink. Press and release the mode button until the LED next to TP lights up. Press and release the increase button then to choose between the timing profiles. Led1=TP1 LED5=TP5. LED 6 and 7 = C1 and C2 respectively. Of course the values for C1 and C2 can only be adjusted via the hotwire.

The directions to change timing profiles are the same as whats in the manual to change throttle profiles
Thanks I looked on Tekins web site for over an hour to find this information when they add new features they should explain them a litte better a video would be nice
jep4755 is offline