Originally Posted by
Shadowhope
it is the screw in the center it is a washer around it
oh your using , the same clutch screw and cone washer im using well the only thing that, will work to get it out is to use the a cut off wheel. and start up to the top of, the cone washer and make a slot down to the bottom of the washer just, make the slot deep enough to use a flat head or get some needlenose and turn the washer to loosen the screw.
and watch, out try not to hit the clutchbell teeth with the cutoff wheel.
and cover up the carb needle so no metal shaveings on into it.