Originally Posted by
auzzy_mate
Morning All,
I built and fitted a new Spec-R Gear Diff last night and took a few photos along the way. I thought I would post them here just to let new/interested users have a look at what a build is like.
Feel free to add comments/tips
.
Ben
I would add that using some thick grease, like Schumachers around the inside of the hole for the outdrive, then pushing the outdrive through the grease etc into position helps creates a better oil seal.
I also greased the O-ring before putting that into position.
Pictures are good, but too small.
Skiddins