Originally Posted by
stellamandude
Thank you very much
Forgot to mention that the fuel is also included, 25% bryons.
Would the above shimming and plug still be suitable ?
I've always had good results, fuel consumption wise, with the 2062 (JP4), any views on this pipe ?
0.3mm head clearance is straight out of the box I assume ?
Byrons is fine, its a decent fuel.
JP Pipes are a tad thirsty
you cant assume what shimming is in there , take the head off and measure with a decent vernier.
make sure you only measure the shims them selves . should be 0.4 mm if you want to get the best out of the engine.
Cheers MM