Originally Posted by
stellamandude
Thank you very much
Forgot to mention that the fuel is also included, 25% bryons.
Would the above shimming and plug still be suitable ?
I've always had good results, fuel consumption wise, with the 2062 (JP4), any views on this pipe ?
0.3mm head clearance is straight out of the box I assume ?
should be fine with byrons 25%..not tried a jp4 myself but I'm sure someone will chime in on that and I think if you check the shims you should have 2 thin copper ones which are .1mm each and an aluminum one which is .3mm as standard..the alloy one is the same color as the head button so can be overlooked easily.so .5mm out of the box..