Originally Posted by
jeff_ellis_9
all im doing is changing the oil. Or do I need to do anything else, like replace anything? If so, what do I need to buy for my 8ight shocks?
Check ur o rings and see if any are ripped or damaged. If not just drain old oil out and make sure its all out mostly at least try to get it all out, then fill with oil of choice with piston all the way down and fill 100% to top then slowly work the piston up and down till all bubbles are gone then let them sit with piton all the way down then put ut bladder on and slowly screw ur cap back on the oil should drain out a bit in the over flow hole and then ur done.