Originally Posted by
shadowR
Hey guys I have an issue with my RS.
I am running the RS and the supplied redline 10.5 on an FDR of 5:1 in my cyclone. This is the longest ratio I have run on it and has been in there since day 1. Running a 2s lipo, balanced it last night.
Temps do not get anywhere near crazy, they are generally bearable to hold your finger on both the motor and ESC.
Issue is that I went to use the car today, when switching it on and going to take off on light throttle, the car juddered to a halt and would not go again at all.
Now the ESC smells like a blown FET and the outer most two LEDs are flashing constantly.
Anyone know what might have caused this and what the LEDs stand for?
Cheers.
If you mean LEDs 1 and 2, and 6 and 7 flashing that is the code for wrong motor type selected.
If the correct motor type is selected and these are flashing you need to contact Tekin support.
Trev