R/C Tech Forums - View Single Post - RB Concept Engine Thread..
View Single Post
Old 08-17-2010 | 09:09 PM
  #1404  
tc5 man's Avatar
tc5 man
Tech Prophet
 
Joined: Oct 2007
Posts: 16,997
From: levittown pa
Default

Originally Posted by Speedyrob
Fully warm the engine up to temp. Bring it in to the pits and listen to it idle if it idle great for 3 seconds then drops lower the bottom end is still rich. If it drops right down to a good idle is perfect if the idle stay up the whole time then yes because your engine is new the idle gap may need to be .8-.9 to idle nice and low. Trying to explain everything to best i can for you.

that sounds right thanks, i did stop end from loading up even though the whole time i, was trying to tune it and the plug was bad.

but the new plug i can, let it sit and i wont load up or flame out like the others times.
tc5 man is offline