R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 08-12-2010, 06:29 PM
  #5175  
irgo
Tech Fanatic
 
irgo's Avatar
 
Join Date: Apr 2006
Posts: 893
Default Speed Passion Suggested Settings Documentation Explanation.

Originally Posted by S.A.W
Ok thanks.

May I ask why you use 5.7 for 13.5 when all the files/documents are recommending around 6.25 - 7.00 ? please don't think I'm saying your setting is wrong but this is where I am getting confused with gearing it correctly and why I asked earlier if there was a suggested setting.
those above red text is the "Suggested Settings" For using the 422 or Supercharge.
as 5.7 FDR is not Speed Passion Starting Recomendation settings.



The manual with the motor recommends 4.8 -6.0 the
those above is the "Suggested Settings" For using Standard Software/Controller
such as "MOD Firmware" or "No Timing Firmware".



SP Basic Supercharger setting PDF say's 6.25-7.0 and then the Word doc say's 6.5-7.0

I never know which to start with I presume you've tried loads of different fdr's ?

Thanks.
Those above is right "Suggested Settings" for Stock or Supercharge 422/528 Firmware (Latest Technology).




as for a while Safety reason Motor recomendation Settings is always for "Mod Firmware" and "No Timing only Firmware" (past technology).

Hope this will help you S.A.W to understand the source of Documentation From Speed Passion.

Last edited by irgo; 08-12-2010 at 06:49 PM.
irgo is offline