Originally Posted by Marcos.J

I done alot of testing with my Sp and I have now a basic setting that I use every time, the only thing I change on it is step#15 and gearing everything else I leave the same. Usually i only have to change gearing maybe 1 or 2 teeth up or down depending on track layout and step #15 i use if the motor temps are too high but most of the time I leave #15 at either 2 or 3. My temps outdoors in the Florida summer heat are 150 degrees on the motor geared at a 4.8 fdr with a 17.5 and 5.7 fdr with a 13.5