BrakeMin. I'm guess the minimum that the brakes will come in at. If set to 100% they would work like an on/off switch?
To me, if you choose value 30 (for ex), then you have 30% of the maximum braking action right after the neutral. Which make the brake more delicate to control.
BrakeMax. Guess you can limit the total amount of braking power available?
Yep something like that. The maximum amount of brake proportionnaly distributed on 95% of the transmitter brake travel, before the red LED flashes.
Autobrake. = Drag brake
Correct
Full brake. not a clue
It's the value of brake action when the red led is about to flash. You can use this function like this: for ex, let's say you need only 80% of the max brake you can adjust an additionnal braking action (emmergency brake) only when you reach the very end of the transmitter brake travel.
Time to full brake. Guess a build up to full power
Yes, it delays the full brake point...
SoftBrake. Not a clue
Kind of delay too.
Once again this is how I understand things. I'm discovering the material and that's what makes sense to me. But it may not be the truth!