R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 08-06-2010 | 01:09 PM
  #34121  
wingracer's Avatar
wingracer
Tech Lord
iTrader: (24)
 
Joined: Nov 2007
Posts: 13,767
Default

Originally Posted by tiko
Hey guys I'm having trouble with the ride height. I got a brand new 12R5 the first two set of tires that I had on the car everything was fine. Now I can't get all four corners to be equal height. Looking at the car from the front right rear corner is lowest of all four corners. Now I did take the whole car apart to check and see if anything was bent; everything looks good. Front tires are trued equal and so are the rears. I even tried to much all the ride height shims and the car is still leaning to the right side. I have Jaco and Xceed tires and it's the same with both of them. Has anyone experienced anything like this before. Any and all suggestions will be greatly appreciated. Thanks
When you say the right rear is low, is that the chassis or the pod?

If it's the chassis, try new front springs. AE springs tend to develop a sag pretty quickly. Then check your tweak and balance.
wingracer is offline