Originally Posted by
MAGPIE-121
deadmancourt heat the motor up with a heat gun before u fire it up & all will be good. the motor isn't run in yet by the sounds of it & the crank play is normal without the flywheel !
have a good look at the head button with a small flat blade screwdriver & see if you have the shimes there as 1 is the same color as the head button & the copper ones might be under it !
hope this helps
thank you!....i put it all back together and sat it out in the sun for 30mins cause i dont own a heat gun and it runs great!....i didnt really even drive it but just fired it made sure it idles and blipped it acouple times and all is good....sounds great!....about the shims,right before i put it back together i tried what you said and found 1 thick shim,the same color as the button head,but no other shims!...should there be any more shims! i only run 20%...i have a few old shims some thin,some thick,but none as thick as the 1 thats on this motor!