Originally posted by clmbia45
Julius, are they worn down evenly, so both front and rear are @56mm at the end? What do you think about a little higher OD ratio, say 0.5mm larger front tires? Thanks.
On the day of this test the front/rear wear was pretty even. I started with a 0.5 split (fronts smaller) and ended up with equal tire sizes.
With same size tires on the 710 you have a little overdrive. If you use more overdrive the turn in (using a one way) is better as the fronts try to slow the car when you get off throttle. Out of corners you will most likely get a little more stability/push than with a 1:1 ratio. Because of the tendency to get oversteer into corners a large front overdrive does not work on slippery tracks. Than you will be better of using a front diff for stability.
In very tight twisty tracks an overdrive might be helpfull. We'll see if a 21 pulley is a worthwile option.
There are no plans yet so no need to ask for release dates
