R/C Tech Forums - View Single Post - OS .12TZ 3PORT TUNE
Thread: OS .12TZ 3PORT TUNE
View Single Post
Old 07-28-2010 | 11:08 PM
  #1  
ramjesr's Avatar
ramjesr
Tech Regular
 
Joined: Jun 2010
Posts: 393
Default OS .12TZ 3PORT TUNE
My tune settings?

--------------------------------------------------------------------------------

I was wondering if anyone has needle settings like this? .12tz 3port engine, P6 glowplug, 30% Byron race fuel. Settings are LSN 1/4 turn out, HSN 3/4 turn out. Idle stop screw at 1mm. The engine has lots of power and speed and runs at 210 degrees. Plenty of smoke out the exhaust at full throttle and some(very little) raw fuel out the exhaust at an idle. It also has a good idle.I just never had to adjust the screws so far in to get that perfect tune.
Last edited by ramjesr; 07-29-2010 at 05:00 AM.
ramjesr is offline  
Reply