R/C Tech Forums - View Single Post - The Speed Passion Thread
Thread: The Speed Passion Thread
View Single Post
Old 07-25-2010 | 06:52 PM
  #5000  
RCHR Racer's Avatar
RCHR Racer
Tech Master
iTrader: (2)
 
Joined: Dec 2009
Posts: 1,719
From: WEST Coast for Life!
Default
Originally Posted by RCMaster1
Sorry for the offroad question, but this seems to be the place to get SP answers. I have an LPF 2.0 in my XXX-T CR with a SP v3 17.5 motor. I just loaded the 422 software and would like some starting software setups. One for an outdoor track that is usually mostly dry and loose and one for an indoor clay track.

Also, the download on the SP site says the 528 download is for the 2.1 only. Can I load the 528 software on the 2.0? If so, are the setups the same as for the 422?

Thanks,
The setups are slightly different. 528 is smoother and a bit stronger.

But for 17.5, start with the setup online, its a great starting point even though its for sedan....just gear appropriately.
RCHR Racer is offline  
Reply