R/C Tech Forums - View Single Post - REEDY .21 Nitro Engine
View Single Post
Old 07-22-2010 | 06:34 AM
  #1060  
Brandon Melton's Avatar
Brandon Melton
Tech Elite
iTrader: (7)
 
Joined: Nov 2003
Posts: 2,506
From: NC
Default

Originally Posted by Andrew_67
Thanks for your help guy`s, got it close, but it seams to bog after take off...lol...once i get a bit off speed, say around a hair pin and punch it it hesitates for a sec or two and then takes off again. I`m no set up tuner guy, i know the basic`s but that`s about it.

Tomorrow i`m going to try the factory settings suggested, thanks again !!
the hesitation and bog you are referring to is from the LSN being too lean or rich. If it's blowing a ton of smoke and blubbering it's too rich, if there's no smoke and it sounds really quiet like it wants to cut off, it's too lean. When just starting out it's difficult I know, but try and learn to tune based on your needs rather than stock settings or someone else settings. Climate, humidity, plug, track, etc... will make a huge difference in needle settings. My needle settings today may not be my needle settings next weekend.
Brandon Melton is offline