R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 07-21-2010 | 12:08 PM
  #11194  
bigmatt's Avatar
bigmatt
Tech Master
iTrader: (16)
 
Joined: Mar 2008
Posts: 1,485
Default

Originally Posted by kevinjh
1/2 turn from flush in on HSN
1 1/2 - 1 3/4 in from flush on LSN
0.8MM iDLE
your almost dead on for my settings. Just go half more in on the hsn. And what I like to do after I get the needles set is to recheck the idle gap. Take off air cleaner and venturie and recheck!! I have found that most times my idle gap has increased slightly. I know you can lower it with out going through all that hassle,but as touchy as these get I like to be sure.
bigmatt is offline