Originally posted by InitialD
I assume that is toe out?
No. toed in.
Originally posted by InitialD
Are you using offset GQ tires? Perhaps the 1 mm shorter Impact dogbones on each side will work fine but I do not find any problem when I go down to 197 mm trackwidth in the rear with the current stock dogbones. The pivot ball at the upper rear arms need to go in max but without binding the edge of the arms. Camber is -3.5 and -3. Perhaps with -4.5 camber, it would be more difficult to keep the rear trackwidth to below 200 mm.
0 offset of GQ when comparing to Ellegy EVI rims (stock green) is differ by .5mm. So when you set the trackwidth 200mm with GQ (0 offset) you must put .5mm spacer when putting EVI wheels.
In front, differ by 1mm !!
Not sure, which one is correct.
But when you use Yokomo setting wheel, the GQ ones is have exactly the same trackwidth.