R/C Tech Forums - View Single Post - Xray T1
Thread: Xray T1
View Single Post
Old 03-13-2004, 07:46 PM
  #6427  
littledog
Tech Regular
 
littledog's Avatar
 
Join Date: Sep 2001
Location: Deezville
Posts: 422
Default

Originally posted by JKA
Anyone having a problem with the steering wandering on an EVO2?

In the middle of a race my car started pulling right slightly. I corrected the trim on my radio and it was fine. 5 laps later it starts pulling left... so I take my trim back to where it was to begin with. Then back to pulling right after awhile. Very odd.

I've changed servos and servo arms, nothing worked. I'm guessing that its something in the Servo saver assembly. The only heat (main luckily) that the car didn't act erratic was after I "worked" the servo saver back and forth while holding the servo linkage.

I'm going to tear it down to see what I might see, but thought I would ask if anyone has had similar experiences.

Thanks


I've run into that problem and what I ended up having to do is to shim the servo saver to be a little bit more tighter.To do that I removed the 'e'clip and placed a shim in and placed the 'e'clip back in place.This tightens the servo sever tighter.
littledog is offline