R/C Tech Forums - View Single Post - KO PROPO / Spektrum Help

07-06-2010 | 09:55 PM

#2

Scott Fisher

Tech Elite

iTrader: (28)

Joined: Aug 2003

Posts: 4,166

From: Henderson, NV

Quote:

Originally Posted by shortbus

I have a KO PROPO Helios with a Spektrum SM1000 DSM module (says KO PROPO in small print across the module label). I then purchased a Spektrum SR3000 recv'er (Universal). I keep trying to bind the two but keep getting an audible alarm from my ESC which would indicate a connection failure. I am able to go back and everything is fine with my old AM system.

I'm just using a Tamiya RTR M03 chassis.

Anyone have any suggestions or am I going thru the binding process wrong?

1) Turn on Radio with module button pressed (released once I have a solid light)
2) Turn on car with receiver button pressed (just blinks green), also ESC audible alarm continues to beep

You have to put the receiver into the bind mode first. Then you do the transmitter. From what you wrote above the problem is you are doing this in the wrong order.

Reply