Originally Posted by
picco007
My understanding is that some radio system receivers can not take a 2 cell lipo (7.4 volts when charged fully is 8.4 volts) fully charged at 8.4 volts. The issue is that the servos would be getting 8.4 volts versus their 6 volts. That is why regulators are needed in some radio systems. At least with 6.6 volt liFe they are fully charged at 7.2 volts and hover below 7 volt for the most part.
If anyone has better info, please chime in. Hope this helps.
Thank you for the help. Airtronics said they hadent tested that system with life or lipo without a reg. so just hopping someone has tried it and can share any info.