Thread: Rc8e vs Rc8be?
View Single Post
Old 07-04-2010, 08:56 AM
Tech Addict
iTrader: (3)
Farmer_John's Avatar
Join Date: Mar 2009
Posts: 624
Trader Rating: 3 (100%+)

Originally Posted by kyle3333 View Post
Basically the difference between the RC8e and the RC8Be, is that the RC8Be comes optioned out and has a revised steering setup. With the RC8Be you get the FT shocktowers, Big Bore threaded shocks, blue aluminum one piece top plate and M3 Hole Shots with molded inserts. The shocks, diffs, and turnbuckles come pre-assembled too, just add fluid.

I got mine last week and tested it out on tuesday. It feels great, its really nice to drive. The optimized steering setup creates much less bump-steer.
I compared the two, shopped for availability, found the right price (240.00 on closeout at Tower) and built one last week.

The diffs and links came built. The RC8e comes standard with the steering mod done.

The differences (beyond the 180.00 price difference):

A B C D plates. The Be's have more adjustments.
Shock towers. The Be's offer more adjustments.
Shocks. The Be uses the threaded aluminum 16mm shocks instead of the cheesy 16mm resin bodies in the e.
Aluminum front top plate (good worthwhile upgrade)

Beyond those differences, they're both the nitro buggies with the AE conversion kit. The e model will accept every Be upgrade.

I"m not sure which set of chassis braces the Be comes with. If it should come with the built up rod braces, I'd recommend DOWNGRADING to the resin braces that come with the RTR and e models. I've bent the rods on hard landings, never had an issue at all with the resin braces.

I will note that I already owned the front top plate and Threaded shocks. I"m running the rest of it with a similar setup to my old Tekno conversion.

Not only does the steering mod reduce bump steer, but it also alleviated the RC8 pushing like a Mack truck...
Farmer_John is offline  
Reply With Quote