setups
if any of u guys r interested, this is the setup i have used on a tight technical carpet track.
ta04 model : ta04 trf with blue aluminium trf shock & MII lower
deck
front
toes : .5 deg out
chamber : -2 deg
caster : 4 deg
kick up : 3 deg (3mm spacers between chassis and hinge pin
holder)
stabiliser : lower yellow (like ta04r)
droop : 3mm
ride height : 6mm
suspension front:
yellow springs
3 hole piston
red sponge inserts
80wt oil
mounting : outer hole in lower arms and 2nd hole counting from
outward on shock tower
rear
toes : 2 deg block
chamber -2 deg
anti-squat : 0 deg
inboard toes : 2 deg in
stabilizer : red
droop : 5mm
ride height : 6mm
suspension rear
blue springs
3 hole piston
red sponge inserts
80wt oil
mounting : inner hole in lower arms and middle holes in rear
shock towers
center pulley : oneway
front diff : full diff
spur/pinion : 128t/32t
motor : kisbey modified 27t stock
batteries : kmr gp3300 match packs
tires : 26r sorex
inserts: sorex medium
rims : top cad aluminium with 2 deg offset
other mods: 2mm tamiya red spacer on wheels and full light
weight universal mip cvd. all chamber link position r
the same as the factory setting.