R/C Tech Forums - View Single Post - Tekin RS ESC sensored
View Single Post
Old 07-01-2010, 09:51 PM
  #15367  
hardmankam
Tech Adept
 
Join Date: Jul 2008
Location: Hong Kong
Posts: 233
Default

Originally Posted by HopeyOne
Hi All,
Installed a Tekin RS and Hacker 17.5 into the E4 and raced on Tuesday night
Need some help with the setup, current setup is as follows

.
.
.

Was running Protek 5000MaH 40C LiPO's
I was running an FDR of 7.97 which equated to a rollout of 25.4mm
Running on a med-large track with a 15-20m main straight(45-60ft)
Car lacked some punch as well as lacking some top speed
Motor never got above 50 deg C (120 deg F)

Any help greatly appreciated
Here are my suggestions:

#1.
Drag Brake 20
Rev strength 100
Brake Strength 100
Neutral Width 56 --> 10
Motor Type BL-FW
Throttle Profile 3 --> 4
Voltage Cutoff 2
Push Control Off
Timing Boost 40 --> 50
Turbo Boost 10
Turbo Delay 0.1 --> 0.2
Sensored (checked)
ESC Model RS Beta
Current Version 203
Start RPM 2950
End RPM 13996 --> ~11000
Turbo Ramp 2.0

or #2.
Drag Brake 20
Rev strength 100
Brake Strength 100
Neutral Width 56 --> 10
Motor Type BL-FW
Throttle Profile 3 --> 4
Voltage Cutoff 2
Push Control Off
Timing Boost 40 --> 45
Turbo Boost 10 --> 15
Turbo Delay 0.1 --> 0
Sensored (checked)
ESC Model RS Beta
Current Version 203
Start RPM 2950 --> ~5x00
End RPM 13996 --> ~13x00
Turbo Ramp 2.0

Check motor temp in both cases.

Last edited by hardmankam; 07-01-2010 at 10:05 PM.
hardmankam is offline