Originally Posted by
Anemic_SluG
Before you all rule out the sensor wire and I know you changed it etc...
2 things... Did you swap motors, the sensor board in the motor can be jacked which will cause the motor to run but in sensorless mode, or I have also found out some sensor wires do not seat all the way without a little coaxing on the esc. Went round and round with a couple of these esc's and both times it was the sensor wire was plugged in but not 100%. So I now take a ball end wrench and really seat the wire, and no issues since.
Good Luck, it may not be the end all fix but it may help.
Could be it but in 3 different cars with three different motors. Only thing in common is the esc brand. One has a 2.0 pro one has a 2.0 lpf and the other a 2.1. I was having problems with a racers esc doing it and I told him mone has never done it then in a practice session it did it. Never did it the rest of the day.