Originally posted by clmbia45
The 9550 is fine for steering, and for throttle also. However, there is a chassis clearance problem with the 9550 used for steering (see prior discussions) as it is 1 mm thicker than the standard servos.
I believe there is still 0.5mm at least for chassis clearance on S710 using S9550 for steering.. otherwise I wont put mine
Yes, you are right.. it will not broke on impact, in fact, the serpent servo horn will
I have friend who is using those sanwa WR? (the newest 13kg digital servo) on throttle and has burn 3 times. He set it quite tight I believe, but that's 13kg
Yes D, those shock tower are not 4mm as I mentioned since I tought the original is 3mm and the new one looks like having 1mm thicker.. You should get those new lightweight pulley aluminum adaptor/holder as well since you are quite Serpent freak
not to mention for having the refference guide keep in the pocket all the time also
