Originally Posted by
minifo
Hey, wondering about to how to get the correct rpm range setting on my tekin rs for a track with the help of a data logger. My plan is to use a Novak Sentry data logger and run the car with a slightly larger pinion and get some good laps with no timing/turbo at first.
My question is when I get the rpm average and rpm min/max from the laps, do I use those values and go about 1000-2000rpm above the low as start and 1000rpm below the max as end or am I totally wrong? The track is technical and has a short straight <70ft so I guess I'll drop turbo.
What I did was to look for the lowest
consistent rpm, and set my speedo to ~1K below or close to it for the start rpm.
Some people have different methods to get their rpm ranges. I used the logger.