R/C Tech Forums - View Single Post - Race merv project
View Single Post
Old 06-23-2010, 05:00 PM
  #1  
ElementR
Tech Initiate
iTrader: (3)
 
ElementR's Avatar
 
Join Date: Sep 2008
Location: Tampa, FL
Posts: 28
Trader Rating: 3 (100%+)
Default Race merv project

I modded my merv for the track, have not gotten to the track yet just got some of my parts today. I moved my ESC and Rx into one of the battery box and put a fan over the ESC. I was running around the parking lot today and had no front end lift at all. The cornering is also insane now. Its 95 here right now. I ran both my 2s lipos one after the other, the ECU never got over 115 and the engine was 140.

I might go buy a new body tomorrow, this one is banged up from sliding on the roof on the pavement. Im eventually going to get a Mamba Max Pro and some better lipos.

2s 2200 mah LiPo
Traxxas GTR Shocks 7061X (Black springs in the back Tan in the front)
Traxxas Response Pro 2.2 Tire-Dish Wheel 7175
Traxxas Push Rod 7118X
Traxxas Toe Link 7138X
Traxxas Center Differential 7014
Traxxas 23t pinion
Traxxas Steel CVD 7151X
Novak 30mm Fan NOV5652







ElementR is offline