Small question Mitch,
Do you use the original FS rear suspension arms??
If so switch to the RS or JS rear arms and you have more play.
The lower pickup point(bottum) is different then the one on the original FS arms.
I had the same problem with my FS and put the RS or JS arms on the car and poof problem solved even with the TM springs.
regards Roy
Originally Posted by
Mitch-e4fs
Hi all
I recently bought an e4fs and have been having some problems getting the ride height down to a reasonable level, I've found some setup sheets for carpet racing and they all want a 4-5mm ride height with team magic pink and purple springs. But those springs are much longer than stock and particularly in the rear I need 6mm or more droop to get the car to sit right. Is this right or am I missing something with my setup?
The car is used for 540 racing with a 4000mah lipo and a min weight of 1.425 kg
Thanks
Mitch