Originally posted by Mike Blackstock
Hey Josh...
We ran the stock springs bent above 180 Basically the stiffest you can find LOL...
As for the setup for trackside...
I ran 70 wt#3's in the front with purple springs rear tower on the front spaced up .030 inside hole with camber link up and short. Droop was 5 and 4 degree's caster with the -1 antidive in the front.. .055 front sway bar -1.0 camber
Rear was 50 wt #3's Purple springs outside hole on tower, short wheel base , Droop at 4 and 3.75 on lr . camber link long and down with losi 0 degree blocks with a silver ball.. -1.0 camber Ride height 5.0 mm front and rear... Also i run the f block in the rear with 3+2 wich gives me about 1.5 toe per side..
If i left something out please tell me...
Mike
Mike,
What about ackerman? From what I saw at the Novak race it seemed that no two had the same. What is your feeling on what ackerman really does. Thanks.
Brian Anthony