R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 06-21-2010 | 08:28 AM
  #10935  
bigmatt's Avatar
bigmatt
Tech Master
iTrader: (16)
 
Joined: Mar 2008
Posts: 1,485
Default

Originally Posted by jeremiah23
guys i run my go 7port yesterday..on the first tank engine is running stupid fast without flame outs,but on the 2nd tank the engine suddenly became weird when im about to start to pull the trigger engine dies every time im gonna go on a speed run,i thought it was the glowplug so i replaced it with a new one,but still doing the same thing,idle is ok it can idle until it sucks dry the fuel on the tank,richened the HSN a bit,checked again the fuel line,fuel tank for airleaks(zero air leaks),could it be the clutch spring,clutchbell bearings etc.??havent touch the engine since it became weird yesterday just waiting for others to give some advices before i touch my engine..
sounds like an air leak. around carb base,needle o-rings,back-plate. also make sure head is tight. I always seal my engines before I ever fire them up. I know that's a little extreme but when something like your describing happens just one problem that was already solved. Also sounds like the lsn is to lean.
bigmatt is offline