R/C Tech Forums - View Single Post - how to make an rc engine heater?
View Single Post
Old 06-20-2010 | 04:16 PM
  #34  
CompetitionHeat's Avatar
CompetitionHeat
Tech Addict
iTrader: (6)
 
Joined: Feb 2010
Posts: 556
Default

Originally Posted by lambchops
Hello guys,

My names John and im the guy behind the Sure-Start which is a brand new product to the market, it’s so new in fact the first 20 units are only shipping to the first batch of customers tomorrow!

Couple of point in the Sure-Starts defense, it can get to way over 150f if you want things hotter, If you are willing to wait a little longer than five minutes it can get the engine over 200F. Five minutes in my opinion is the bench mark as most racers don’t want to wait around for 10 - 15 minutes before starting as it would mean it just simply wouldn’t get used most of the time.. In comparison tests with other competitor’s products it outperforms it and runs on 12V. Im also testing on a 3 cell Lipo now


At the moment the Sure-Start is available on two size casing, small and Large and at the moment is targeted for 1/8th off-road engines, however there is no reason why I cannot produce a dedicated .12 size if the demand is there as all casing are interchangeable.

Thanks

John
Welcome John... I tried doing on a UK forum (MaxBashing) what you have just done here, introduce yourself and product. Our thread was deleted and we were basically told since we were not a "Home Grown" business in the UK we were not welcome. I just wanted to welcome you and I know RC Tech and their moderators are more than fair and will show no bias. Good luck to you and your product.
CompetitionHeat is offline