Originally Posted by
mlight13
I need some help. I am running a XeRun 13.5 (2,500kv) motor and SP 422 firmware with an FDR of 7.31 which seems perfect for my medium asphalt track as I hit full speed right at the end of the straight. My motor temp hit 205*F after 5 minutes and the outside air temp was around 75*F. I need it to run cooler, but how??? I thought I was already running conservative settings on my ESC.
My ESC settings are:
4/ 8
9/ 7
12/ 7
13/ 4
14/ 5
15/5
The car seems good all around with speed and braking, but the motor gets waaaay too hot! Please help!
I am running a SP V2 11.5t motor with the 422 FW. My motor temp usually at 65-70*C. First I suggest that you get a heatsink and a fan to externally cool the motor. This will help alot.
If I'm you at that FDR, I'll use this setting: -
4/ 7
9/ 5
12/ 7
13/ 1
14/ 2
15/ 4