Originally Posted by
xxxntwv
I ran one with an re10 pipe and was getting around 9-30 to 10 minute in buggy.The bearings and rod hold up very well and the pinch last a long time.Myself I didn't like the 2045 it killed the power and temps went up 30 deg and got less runtime.
So you had good luck with the RE10? Just started running my newly rebuilt C6 USA. It has a bad air leak somewhere. Won't idle at all. Thanks to Chris Peralta for the carb settings. It won't come close to idling with the carb idle gap set properly. Won't stop racing. LSN has to be very rich and the idle gap very small then it just stalls. I'm going to put my FMS carb on it. Looking forward to racing it. Motor showing killer power even with air leak. I will be trying my RE10 also.