Originally Posted by
Muggydude
I just picked up myself a new (to me) MBX6. What is a good base setup as far as diffs and shocks (shock oil in Losi weights)? Also, are there any upgrades I should get right away? Spares? Thanks
Mspec setup is nice for the diffs. For the shocks I fealt they stock oil was too stiff for my liking so i dropped it to (30-25 Trinity oil) . Only thing is the king headz extended motor mount. Thats it, the rest of the stuff is just bling.
Originally Posted by
dishsoap
Hey guys. What is the sequence for removing the front diff the fastest for servicing?
Thanks
Originally Posted by
Lonestar
This I can do with my eyes closed as I've tried so many diff combinations
1- unscrew swaybar grub screws
2- unscrew bottom shock mount screw
3- unscrew both chassis front diff case mount M4 screws - pull bumper
4- unscrew both M3 upper diff case screws
5- unscrew both M4 hinge pin nuts (then it depends if you have them at the front or the rear. Easier if in front but eats up bumpskids. Stock bumper survives fine tho).
6- unscrew both M3*30 (the long ones with the washers) screws
7- pull front brace - don't lose wheelbase clips
8- pull diff case
9- pull diff out of car
To reassemble, do it the other way around. good luck putting the M4 screws back on if you have them at the rear
Paul
What he said. But have my m4 towards the back and have no issues getting them back on. But im cool like that. LOL