R/C Tech Forums - View Single Post - ERBE Help
Thread: ERBE Help
View Single Post
Old 05-26-2010 | 06:25 PM
  #6  
agentfox1942
Tech Initiate
 
Joined: May 2010
Posts: 35
From: hagerstown, MD
Default
Originally Posted by pedecrawler
If you use the castle link, set it to auto lipo and then you can adjust the LVC to 3v - 3.7v per cell. 3.5 is kinda high. I run all mine at 3.3v. This is still higher than the recommended setting for most lipos.
The best upgrades IMO are the Variable Dampening Piston kit and the RPM true trac kit for the rear. Also for good batteries with long runtime go with SPC 2s 8000mah. They are the best bang for the buck.
I bought those exact batteries. Tom is a great help at SPC.

Thanks everyone. I'll check at the Traxxas site again. I thought I searched for everything I needed and didn't come up with much. I'll try again.
agentfox1942 is offline  
Reply