Originally Posted by
Lgbzone
I have the lightweight spur on one of mine, can't tell the difference but i needed a spur and they're the same price.
my race vorza is totally kitted out with the wce parts, be warned when assembling them; the pins in the wce joints don't have a notch in them, the second the slightest play forms they will come out, buy the standard universal joint rebuild kits and use the pins from them, they have a small notch, when the pin comes loose it can move a bit but not all the way out so that it gets lost, check them often and tighten the grub screw as needed. also cover them with heat shrink tubing, ensure you get thick stuff, the first time i did mine it was too thin and the pin went through it, i wasn't using a notched pin at the time.
another thing; be careful not to apply too much thread lock to the grub screw, it can foul the movement of the joint.
they look far better than the dog bones.
cheers