Originally Posted by
maxg123456
Hi,
Can anyone give me a good setting for a new 13.5 pro-stock GM motor. (GM97294)
I just got it after depleting a 13.5 Speed Passion Feigo V1 motor yesterday!
I would like a setting for a technical indoor track, so not too gutsy/torquey at low speed for the infield and more revvy and fast on the straight.
Also, any tips for keeping top end speed and taking away torque on a 10.5, so it doesnt heat up the TC rubber tires on a carpet surface too much? - The settings i ran yesterday were good with a Novak 10.5ss but the car would start to oversteer during the run, due to the rears overheating with the loading the tires had. I run an Xray 008.
run a higher value for item 15 and lower drrs with a lower fdr should give you less torque