R/C Tech Forums - View Single Post - Tamiya TRF415
Thread: Tamiya TRF415
View Single Post
Old 02-29-2004 | 04:05 PM
  #951  
Rick Draper
Tech Fanatic
iTrader: (1)
 
Joined: Nov 2001
Posts: 997
From: Somewhere on earth
Default

Yes it comes with all the piviot blocks and all the roll bars. Also now you adjust rear toe on the front rear block not the rear rear block as before, the blocks are 1mm lower than the evo 3 ones but you run the front ones flat to the chassis and the rears 2mm higher i think. Also Square do ti screw sets very cheap . Also on the front you use 2 D blocks so the track width only requires 0.5mm of spacers per side. Rick
Rick Draper is offline