Originally Posted by
defcone
Front:
Tamiya Shocks with black pink HPI spring, 50wt oil, 2nd shock tower hole
1.4m roll bar
Inner steering block hole
8mm steering rack
5mm ride height, 6 Droop
1mm Shim under camber link in the bulkhead
HPI Pink spring
1 Toe Out
43.5 Toe blocks(front and rear)
Rear:
3 deg toe in
Tamiya TRF Shocks with black/blue HPI spring, 35wt oil, 2nd shock tower hole(counting from most inner one)
1.1mm roll bar
Inner hub hole
5.5mm ride height, 5 droop
Bd5w chassis with low diff position.
TBO, i would use the Yokomo shocks as they work alot better for this car. Ok i see the problems. I would go Yokomo shocks with 500 wt oil, Pink Front silver rear spring. I would change the inner front camberlink to 2mm, and add 1mm shim to the inner and outer rear camberlink. Also stand up your rear shocks 1 hole and go 0.5d toe out on the front instead of 1. This should hopefully work.
If the problem still exists try 5.5, 4.5 droop.
Try Jordans setup as well
Antoni