R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 05-17-2010 | 09:44 PM
  #4346  
wan161111
Tech Initiate
 
Joined: Feb 2010
Posts: 41
Default

Originally Posted by Solara
YES....you can use 9.5T motor with 422 software. HOWEVER, you must turn down the #9, #12 to #15 features in order to keep the 9.5T motor by blowing up.

I have not tried anything faster then 10.5 with 422 software, but if I am going to try it, I would do at least 1 setting lower from the 10.5 setup.

Speed Passion drivers from Europe has been testing the 422 software with 3.5-4T motor, however, we have yet to receive any recommanded setting for these motor use.

See Charlie-B 10.5 setup above and decrease a notch on 9, 12-15 items (don't forget to gear lower then 10.5)and temp motor every 5 laps or so.

Let us know your testing....good luck.
tq solara..
wan161111 is offline