Originally Posted by
mark williams
Hi guys, I'm set to try the 422 software down my club on Friday with v3 10.5
the track has a 20m straight and i was hoping someone has tried it with success..what are the main settings to play with? I don't want it too punchy on the infield but would like to rip down the short straight
cheers mark
Mark, start with these settings for 10.5
4/8
9/8
12/6
13/3
14/2
15/3
If you are temping higher than 160*F, then lessen your #15 to 15/4. gearing will depend on your driving. With #15, higher parameters =less punch.
Good Luck.
After about 2 minutes, check your temps.