Originally Posted by
spillman120
what is a good gear/pinion combo for the 2wd slash for dirt, im asking what do u guys run in ur trucks and what batteries...... im tryin to learn what set ups are good for my stock slash..... thanks
here is what i have done to my slash for the stock class at hobbyplex in Omaha which is a pretty big track my setup is below .
rear camber -2.0
front camber -1.0
front toe -.05
shocks 60 wt all around
front shocks in outter position
rear shocks in second from outside hole
86 spur 18 pin
also turned the tires around so the treads are backwards believe it or not it helps with traction.
i also loosened up the slipper a little more than it was stock so it wouldnt slide around on me when coming around the turns hope this helps
i think this is a pretty forgiving set-up