Originally Posted by
lanmine657
just got 2010 b5 fully broken in and was wondering about where you guys have your needles at, I have a little bit of high to low idle going on(low end set rich) but not bad. Motor is running great, just curious to know where other poeple are at for comparison. I am at about 1/2 turn in from flush on bottom and full turn in on top, I am at 5,000ft elevation so I would expect my settings to be a bit leaner than others.
Ive got both needles about 2 and a half turns in from flush. I do the pinch test and idle comes up a little for a about 5 seconds and dies. I may still be able to go a little leaner on top but wont do anything with that until I hit the track Sat. Im in Ca. at sea level..... Im running about a half mm air gap.